Shims and Wires
Stainless Steel Shim
Shim stock is used to make shims to create support, level an object, or ensure a tighter fit among parts. Stainless steel shim stock is a particularly durable type of shim stock and is appropriate for several applications including axle shims, tool and die alignment, and arbor spacers. They are also used for leveling as in a motor mount shim, aligning a shaft and a motor as in an alignment shim, or for reducing a gap between two parts
Roll size : 6″ x 50″, 12″ x 50″
Stainless Steel Binding Wire
Stainless Steel Binding Wire is used to help join two pieces of metal. Metal expansion occurs when heated; if the wire is too tight or thick, it can mark the metal. It comes in various thickness from 0.5 mm to 4 mm and comes in roll of 25 kgs. Grades available in these wire are stainless steel 304 and 316
Brass Shim
Brass Shim is made from a half hard, cold rolled, 260 alloy brass. Shims made from brass are often used for applications where low friction is required and also used for decoration for its bright gold-like appearance.
Roll size : 6″ x 100″
Stainless Steel Wire Mesh
Type 304 stainless steel wire mesh is the most extensively used material in the industrial wire cloth world. Type 304 ( SS304) is the basic stainless steel alloy and is often referred to as 18-8 stainless steel An extensive range of stainless wire woven mesh available in both grades 304 and 316 Both mesh comes in various sizes and thickness and the roll sizes of 304 grade is 1 mtr width x 30 mtr long as for 316 grade comes in 1.2 mtr width x 30 mtr long shims and wires